Details
Small aperture thermally protected, specification grade recessed housing. For new construction non-insulated ceilings or where insulation can be kept 3" from housing. Accommodates up to 50W PAR20, R20, and A19 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
Additional Information
Warranty | 90 Days |
---|---|
Application | Recessed Lighting, Down Lighting |
Cross Reference Number | BS4AT,SR4N,CH99TA,RX-104AT |
For use with insulated ceilings: | See Spec Sheet |
Dimmable | Yes |
Approvals | UL |
Bulbs | (1) Maximum 50W R/PAR20/A19 |
Bulb Included | No |
Features | ? Thermally Protected Non-IC housing.? Designed for accent and task lighting applications.? Adjustable Socket bracket.? Wire through junction box.? Preinstalled adjustable bar hanger.? Dependable, favorable design and effortless installation.? 5 1/2? height allows use in 2?x 6? joist construction.? Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.? Preinstalled socket cap provides electrical contact protection against dust, paint and over spray. |
Housing Specs | High temperature painted 22 gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate 1/2? to 1-3/8? ceiling. Accommodate lamps up to 50W depending on trim used. |
Thermal Protection | Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material. |
Socket | Medium base screw shell porcelain socket preinstalled on adjustable mounting bracket is designed to allow usage of different lamp types, as well as proper and consistent lamp positioning. |
Installation | Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24? joist span and can be shortened for 12? joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary. |
Junction Box | UL and ETL listed for through-branch circuit wiring and has four 1/2? KOs, one 3/4? KO and four Romex knockouts with true pry-out slots and strain clamps. |
Max Watts | 50 |
Diameter (in) | 4 |
You may also be interested in the following product(s)
-
Recessed lighting LED 7watt Par20 2700K 40° Flood light bulb dimmable
# LED-PAR20D-2700K-FL$3.24 -
Green Watt G-DL4D-15W-27EL 4" dimmable LED recessed lighting 15watt retrofit white reflector trim 2700K
# G-DL4D-15W-27EL$8.58