Details
Small aperture thermally protected, specification grade recessed housing. For remodel application non-insulated ceilings or where insulation can be kept 3" from housing. For fast and easy installation in existing plaster or mechanical ceilings from 1/2" to 1-3/8" thick. Four remodel clips are easily retractable for fixture removal if necessary. Junction box is provided with eight 1/2" KOs and four Romex knockouts with strain relief. Accommodates up to 50W PAR20, R20, and A19 lamps and many of the lower wattage spiral fluorescent retrofit lamps.
Additional Information
Important Note | Use only with LINE VOLTAGE trims and screw in bulbs. |
---|---|
Application | Recessed Lighting, Down Lighting, kitchen lighting accents,art gallery lighting,bedrooms,offices |
Cross Reference Number | BRRAT,SR4R,CH99RA |
For use with insulated ceilings: | NO |
Material | Aluminum |
Dimmable | Yes |
Approvals | ETL, UL |
Bulbs | (1)up to a maximum 50W R/PAR20/A19 |
Bulb Included | No |
Features | Thermally Protected Non-IC Remodel housing.? Dependable, favorable design and effortless installation. Unit slips through 4-1/4" ceiling opening. Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2" to 1-3/8" Can be installed from below the ceiling 5 1/2" height allows use in 2"x 6" joist construction. Preinstalled socket cap provides electrical contact protection against dust, paint and over spray. Adjustable Socket bracket. |
Housing Specs | High temperature painted 22 gauge deep drawn single piece housing. Accommodate lamps up to 50W depending on trim used. |
Thermal Protection | Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material. |
Socket | Medium base screw shell porcelain socket preinstalled on adjustable mounting bracket is designed to allow usage of different lamp types, as well as proper and consistent lamp positioning. |
Installation | Four Preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2" to 1-3/8". |
Junction Box | UL and ETL for feed through wiring with eight 1/2" KOs and four Romex knockouts with strain relief. |
Max Watts | 50 |
Voltage Type | Line Voltage (120V +) |
Input Voltage | 120VAC |
Diameter (in) | 4 |
Height (in.) | 5-1/2" |
You may also be interested in the following product(s)
-
Recessed lighting LED 7watt Par20 2700K 40° Flood light bulb dimmable
# LED-PAR20D-2700K-FL$3.24 -
Green Watt G-DL4D-15W-27EL 4" dimmable LED recessed lighting 15watt retrofit white reflector trim 2700K
# G-DL4D-15W-27EL$8.58