Details
Includes the following items:
- TLSL4IC-50-M-120-AT housing
- TLS1401WH-WH trim
- For Damp location
- For Feed-through wiring
- For Direct contact with insulation
Additional Information
Warranty | 90 Days |
---|---|
Application | Kitchens, Bathrooms, hallways, offices |
Cross Reference Number | BL4IC, BL4IC-AT, B1401W, B1401W-WH |
Adjustable | Yes |
Material | Aluminum |
Dimmable | Yes |
Approvals | ETL |
Inside Color | Satin Nickel |
Outside Color | Satin Nickel |
Bulb Type | MR-16 |
Bulb Wattage | 50 |
Bulb Included | No |
Bulb Base | G5.3 |
Beam Spread | Flood |
Beam Spread (Deg.) | 36 +- |
Bulb Light Spectrum (%) | 100 |
Features |
|
Transformer | Enhanced in heat dissipating cover, to provide noise free operation. Attached to junction box cover so it may be serviced from below the ceiling. Thermally protected. M - Class H dimming magnetic transformer. |
Thermal Protection | Thermally Protected IC housing. |
Junction Box | ETL and UL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps. |
Installation | Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary. |
Housing Specs |
|
Max Watts | 50 |
Voltage Type | Low Voltage (12Volt) |
Input Voltage | 120VAC |
Output Voltage | 12VAC |
Inside Diameter (in.) | 4-3/8" |
Height (in.) | 7-1/4" |
Width (in.) | 8" |
Length (in.) | 12-1/4" |