Details
2" Recessed housing with our smallest aperture low voltage, thermally protected remodel housing. For fast easy installation in existing plaster or mechanical ceilings from 1/2"" to 1-3/8" thick.
Three remodel clips which can be accessed from below the ceiling, are easily retractable for fixture removal if necessary. Accommodates up to 50W MR16 lamps. Junction box is provided with two 1/2" KOs.
Additional Information
Application | kitchen accent light, shower and bathroom, |
---|---|
Cross Reference Number | US-REC234 |
For use with insulated ceilings: | NO |
Material | Aluminum |
Dimmable | Yes |
Bulbs | MR16 |
Bulb Included | No |
Features | Integral low voltage electronic transformer to prolong lamp life and increase lighting quality. Thermally Protected Non-IC Remodel housing. Can be installed from below the ceiling Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2" to 1-3/8". Designed for accent and task lighting applications. Preinstalled adjustable bar hangers. Dependable, favorable design and effortless installation. 4-1/2" height allows use in_2"x 6" joist construction. Unit clips through 2-1/2" ceiling opening |
Junction Box | ETL listed for through-branch circuit wiring and has four 1`/2" KOs. |
Installation | Listed For Damp location For Feed-through wiring Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thickness from 1/2" to 1-3/8". |
Socket | MR16 low voltage socket |
Housing Specs | High-tempered twenty-two (22) gauge deep drawn single piece aluminum housing. Accommodates lamps up to 50W depending on trim used. |
Max Watts | 50 |
Voltage Type | Low Voltage (12Volt) |
Input Voltage | 120VAC |
Output Voltage | 12VAC |
Height | 4-1/2" |