Details
The very shallow 3" recessed low voltage remodel housing. Fits in tight spaces and 2" x 4" joist construction. Fixtuer is only 3-5/8" tall. The one to use where space is limited. Works with any MR16 lamp up to 35watts, but a 20watt lamp is usually bright enough for most applications. Use this housing with any of our 3" designer quality trims.
Small aperture low voltage, thermally protected remodel housing. For fast easy installation in existing plaster or mechanical ceilings from 1/2" to 1-3/8" thick. Three remodel clips are easily retractable for fixture removal if necessary. Accommodates up to 35W MR16 lamps.Additional Information
Warranty | 90 Days |
---|---|
Application | Kitchen Lighting, Offices, Home Lighting, anywhere where a designer downlight is required |
Cross Reference Number | BL3RE-S, SRL3RE-S |
For use with insulated ceilings: | No |
Adjustable | No |
Material | Aluminum |
Dimmable | Any low voltage dimmer |
Approvals | ETL |
Bulbs | MR-16 UP TO 35 WATTS ONLY |
Bulb Included | No |
Features | Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from1/2" to 1-3/8". Integral low voltage electronic transformer to eliminate noise and vibration, increasing lamp life and lighting quality. Thermally Protected Non-IC Remodel housing. Can be installed from below the ceiling Designed for accent and task lighting applications. Dependable, favorable design and effortless installation. Unit clips through 31/2" ceiling opening 3-5/8" height allows use in_2"x 4" joist construction. |
Thermal Protection | Yes |
Junction Box | ETL listed for through-branch circuit wiring and has four1/2" KOs, one3/4" KO and four Romex knockouts with true pry-out slots and strain clamps. |
Socket | Low voltage MR16 two pin 12volt |
Housing Specs | Housing High-tempered twenty-two (22) gauge deep drawn single piece aluminum housing. Accommodates lamps up to 35W depending on trim used. Transformer Class II dimming electronic transformer enhanced in heat dissipating cover attached to junction box cover. |
Max Watts | 35 |
Voltage Type | Low Voltage (12Volt) |
Input Voltage | 120VAC |
Output Voltage | 12VAC |
Height (in.) | 3-5/8" |
You may also be interested in the following product(s)
-
Recessed lighting LED 7watt MR16 5000K cool white 25° narrow flood light bulb low voltage dimmable
# LED-MR16GU53D-5000K-NFL$20.52 As low as: $4.80 -
Recessed lighting LED 7watt MR16 3000K warm white 25° narrow flood light bulb low voltage dimmable
# LED-MR16GU53D-3000K-NFL$5.13
Customers Who Bought This Item Also Bought