Product Videos

  • Buying cheap LED bulbs doesn't always pay off!

4" Air tight low voltage remodel recessed housing best seller 120volt

# TLSL4R-50-M-120-AT-W
4" recessed low voltage standard remodel 120volt housing. Works with any MR16 lamp up to 50 watts, but a 20 watt lamp is usually bright enough for most applications. Use this housing with any of our extensive line of low voltage recessed designer quality trims.
Use with any LOW VOLTAGE trim and MR16 Lamp

Availability: Typically ships same or next business day!

$20.26

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture low voltage, thermally protected remodel housing. For fast and easy installation in existing plaster or mechanical ceilings from1/2" to 1-3/8" thick. Four remodel clips are easily retractable for fixture removal if necessary. Accommodates up to 50W MR16 lamps. Junction box is provided with eight1/2" KOs, and four Romex knockouts with strain relief.
Additional Information
Important Note Use with any LOW VOLTAGE trim and MR16 Lamp
Application Recessed Lighting, Down Lighting, Kitchen Lighting, Office Spaces
Cross Reference Number BLR4,SRL4R,CLV1499RA,RX-204RAT
For use with insulated ceilings: NO
Material Aluminum
Dimmable Magnetic
Approvals ETL
Bulbs (1)UP to Maximum 12V 50W MR16
Bulb Included No
Features Integral low voltage magnetic transformer to prolong lamp life and increase lighting quality. Thermally Protected Non-IC Remodel housing. Can be installed from below the ceiling Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2 to 1-3/8". Designed for accent and task lighting applications. Dependable, favorable design and effortless installation. 51/2" height allows use in 2"x6" joist construction. Unit clips through 41/4" ceiling opening.
Housing Specs High temperature painted 22 gauge deep drawn single piece housing. Accommodates lamps up to 50W depending on trim used.
Socket MR-16 12volt Socket
Thermal Protection Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material.
Installation Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thickness from 1/2?\" to 1-3/8".
Junction Box ETL and UL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps.
Max Watts 50
Voltage Type Low Voltage (12Volt)
Input Voltage 120VAC
Output Voltage 12VAC
Diameter (in) 4
Height 5-1/2"
You may also be interested in the following product(s)
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Air tight low voltage remodel recessed housing best seller 120volt
4" recessed low voltage standard remodel 120volt housing. Works with any MR16 lamp up to 50 watts, but a 20 watt lamp is usually bright enough for most applications. Use this housing with any of our extensive line of low voltage recessed designer quality trims.
$20.26