Product Videos

  • Buying cheap LED bulbs doesn't always pay off!

4" Low voltage electronic IC rated air tight new construction recessed housing 277volt

# TLSL4IC-50-E-277-AT-W

Be the first to review this product

Electronic 4" recessed low voltage new construction IC and AT housing 277volt. Standard height of 7-1/4" allows use in 2" x 8" joist construction. Works with any MR16 lamp up to 50watts. Use with our 4" Low voltage trims, we offer almost 1000 different trims in an array of finishes and styles.
Use with any LOW VOLTAGE trim and MR16 Lamp

Availability: Typically ships same or next business day!

$97.41

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture low voltage, thermally protected IC rated, specification grade recessed housing. (1) Maximum 12V 50W MR16 Designed for new construction. Accommodates up to 50W MR16 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief. Enhanced in heat dissipating cover, to provide noise free operation. Attached to junction box cover so it may be serviced from below the ceiling. Thermally protected.dimming magnetic transformer.. (Must use dimmers rated for electromagnetic transformer)
Additional Information
Warranty 90 Days
Important Note Use with any LOW VOLTAGE trim and MR16 Lamp
Application Recessed Lighting, Down Lighting
Cross Reference Number BLRICAT, SRL4ICN, CLV1499ICTA, RX-204ICAT
For use with insulated ceilings: Yes
Material Aluminum
Dimmable Any low voltage dimmer
Approvals ETL
Bulbs (1) Up to a maximum 12V 50W MR16
Bulb Included No
Features Integral low voltage electronic transformer to prolong lamp life and increase lighting quality. Thermally Protected IC housing. Designed for accent and task lighting applications. Wire through junction box. Preinstalled adjustable bar hangers. Dependable, favorable design and effortless installation. 7-1/2"" height allows use in 2"x 8" joist construction. Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
Housing Specs OUTER HOUSING - Die-formed aluminum construction for maximum heat dissipating air chamber on top of the housing. Junction box could be accessed from inside and outside housing. INNER HOUSING - Deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8" ceiling.
Socket MR-16 12volt Socket
Thermal Protection Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material.
Installation Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
Junction Box ETL and UL listed for through-branch circuit wiring and has four 1/2? KOs, one 3/4? KO and four Romex knockouts with true pry-out slots and strain clamps.
Max Watts 50
Voltage Type Low Voltage (12Volt)
Input Voltage 277VAC
Output Voltage 12VAC
Diameter (in) 4
Height 7-1/2"
You may also be interested in the following product(s)
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Low voltage electronic IC rated air tight new construction recessed housing 277volt
Electronic 4" recessed low voltage new construction IC and AT housing 277volt. Standard height of 7-1/4" allows use in 2" x 8" joist construction. Works with any MR16 lamp up to 50watts. Use with our 4" Low voltage trims, we offer almost 1000 different trims in an array of finishes and styles.
$97.41