Details
Small aperture low voltage, thermally protected remodel housing. For fast and easy installation in existing plaster or mechanical ceilings from1/2" to 1-3/8" thick.
Four remodel clips are easily retractable for fixture removal if necessary. Accommodates up to 50W MR16 lamps, but a 20 watt lamp is usually bright enough for most applications. Junction box is provided with eight1/2" KOs, and four Romex knockouts with strain relief.
Additional Information
Important Note | Use with any LOW VOLTAGE trim and MR16 Lamp |
---|---|
Application | Recessed Lighting, Down Lighting, Kitchen Lighting, Office Spaces |
Cross Reference Number | BLR4-50-E-120-AT, SRL4R, CLV1499RA, RX-204RAT, H1499RTAT |
For use with insulated ceilings: | NO |
Material | Aluminum |
Dimmable | Electronic |
Approvals | cETL, ETL, UL |
Bulbs | 1 x UP to Maximum 12V 50W MR16 |
Bulb Included | No |
Features | Integral low voltage electronic transformer to prolong lamp life and increase lighting quality. Thermally Protected Non-IC Remodel housing. Can be installed from below the ceiling Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2 to 1-3/8". Designed for accent and task lighting applications. Dependable, favorable design and effortless installation. 51/2" height allows use in 2"x6" joist construction. Unit clips through 41/4" ceiling opening. |
Housing Specs | High temperature painted 22 gauge deep drawn single piece housing. Accommodates lamps up to 50W depending on trim used. |
Socket | MR-16 12volt Socket |
Thermal Protection | Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material. |
Transformer | Class II dimming electronic transformer. Enhanced in heat dissipating cover, to provide noise free operation. Attached to junction box cover so it may be serviced from below the ceiling. Thermally protected. |
Installation | Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thickness from 1/2?\" to 1-3/8". |
Junction Box | ETL and UL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps. |
Max Watts | 50 |
Voltage Type | Low Voltage (12Volt) |
Input Voltage | 120VAC |
Output Voltage | 12VAC |
Diameter (in) | 4 |
Height (in.) | 5-1/2" |
You may also be interested in the following product(s)
-
Recessed lighting LED 7watt MR16 5000K cool white 25° narrow flood light bulb low voltage dimmable
# LED-MR16GU53D-5000K-NFL$20.52 As low as: $4.80 -
Recessed lighting LED 7watt MR16 3000K warm white 25° narrow flood light bulb low voltage dimmable
# LED-MR16GU53D-3000K-NFL$5.13
Customers Who Bought This Item Also Bought