Details
Small aperture low voltage, thermally protected, specification grade recessed housing. For new construction Non-insulated ceilings or where insulation can be kept 3" away from the housing. Accommodates up to 50W MR16 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
Additional Information
Warranty | 90 Days |
---|---|
Important Note | Use with any LOW VOLTAGE trim and MR16 Lamp |
Application | Recessed Lighting, Down Lighting |
Cross Reference Number | BL4IC-AT,SRL4N,CLV1499TA,RX-204AT |
For use with insulated ceilings: | No |
Material | Steel |
Dimmable | Any low voltage dimmer |
Approvals | ETL |
Bulbs | (1) UP to a maximum 12V 50W MR16 |
Bulb Included | No |
Features | Integral low voltage electronic transformer to prolong lamp life and increase lighting quality. Thermally Protected Non-IC housing. Designed for accent and task lighting applications. Wire through junction box. Preinstalled adjustable bar hangers. Dependable, favorable design and effortless installation. 5-1/2" height allows use in 2"x6" joist construction. Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed. |
Housing Specs | High temperature painted 22 gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8" ceiling. Accommodates lamps up to 50W depending on trim used. |
Socket | MR-16 12volt Socket |
Thermal Protection | Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material. |
Installation | Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary. |
Junction Box | ETL and UL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps. |
Max Watts | 50 |
Voltage Type | Low Voltage (12Volt) |
Input Voltage | 120VAC |
Output Voltage | 12VAC |
Diameter (in) | 4 |
Height (in.) | 5-1/2" |
You may also be interested in the following product(s)
-
Recessed lighting LED 7watt MR16 5000K cool white 25° narrow flood light bulb low voltage dimmable
# LED-MR16GU53D-5000K-NFL$20.52 As low as: $4.80 -
Recessed lighting LED 7watt MR16 3000K warm white 25° narrow flood light bulb low voltage dimmable
# LED-MR16GU53D-3000K-NFL$5.13