Product Videos

  • Recessed lighting Torsion Spring Retention system overview

Due to variations in computer and mobile device displays actual colors in item images may vary from what appears on your screen. Color will also vary depending on the color temperature you are viewing the physical item.

4" Recessed lighting GU10 120volt IC air tight new construction housing

# TLSG4IC-50W-120-AT

Be the first to review this product

4" Recessed lighting IC air tight GU10 housing for use in new construction, 120volt application and works with most of our 4" low voltage GU10 compatible recessed lighting trims and halogen & LED GU10 light bulbs up to 50watt: NOTE: THIS HOUSING COMES WITH A GU10 SOCKET ONLY.  ORDER CAREFULLY

Availability: 8 - 10 Day lead time

$31.35

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture line voltage, thermally protected IC rated, specification grade recessed housing. Designed for new construction. Accommodates up to 50W GU10 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
Additional Information
Application Recessed Lighting, Down Lighting,kitchen lighting,
Cross Reference Number G4IC, G4IC-50W-120-AT, G4ICAT
For use with insulated ceilings: Yes
Material Steel
Dimmable Yes
Approvals cETL, ETL
Bulbs (1) Up to a maximum 50W GU10 lamp
Bulb Included No
Features
  • Thermally Protected IC housing.
  • Designed for accent and task lighting aplications.
  • Wire through junction box.
  • Preinstalled adjustable bar hangers.
  • Dependable, favorable design and effortless installation.
  • 7-1/4" height allows use in 2"x 8" joist construction.
  • Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
  • Gasket to prevent air flow form heated or air conditioned spaces - Meets all national air flow requirements
Housing Specs

OUTER HOUSING - Die-formed aluminum construction for maximum heat dissipating air chamber on top of the housing. Junction box could be accessed from inside and outside housing.

INNER HOUSING - Deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8" ceiling.

Thermal Protection Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
Socket GU10 floating socket allows for lamp to snap into trim and provide secure lamp retention.
Installation Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
Junction Box ETL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps.
Max Watts 50
Voltage Type Line Voltage (120V +)
Input Voltage 120VAC
Output Voltage 120VAC
Diameter (in) 4
Height (in.) 7-1/4"
Width (in.) 8"
Length (in.) 12-1/4" - 24"
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Recessed lighting GU10 120volt IC air tight new construction housing

4" Recessed lighting IC air tight GU10 housing for use in new construction, 120volt application and works with most of our 4" low voltage GU10 compatible recessed lighting trims and halogen & LED GU10 light bulbs up to 50watt: NOTE: THIS HOUSING COMES WITH A GU10 SOCKET ONLY.  ORDER CAREFULLY

$31.35