Product Videos

  • Recessed lighting Torsion Spring Retention system overview

4" Recessed lighting non-IC GU10 120volt air tight remodel housing

# TLSG4R-50W-120-AT-GU10

4" Recessed lighting air tight GU10 non-IC remodel housing for in 120volt application and works hundreds of our 4" low voltage GU10 compatible recessed lighting trims and halogen & LED GU10 light bulbs up to 50watt. NOTE: THIS HOUSING HAS A GU10 SOCKET AND MUST BE USED WITH GU10 LAMPS ONLY. ORDER CAREFULLY.

NOTE: The hole for this fixture is required to be 4-1/4" we send a template do not cut the hole until the fixture is on site.

Availability: Typically ships same or next business day!

$15.37

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture line voltage, thermally protected remodel housing. For fast and easy installation in existing plaster or mechanical ceilings from 1/2" to 1-3/8" thick. Four remodel clips are easily retractable for fixture removal if necessary. Accommodates up to 50W GU10 lamps. (Best to use LED GU10 Lamps) Junction box is provided with eight 1/2" KOs, and four Romex knockouts with strain relief.
Additional Information
Application Recessed Lighting, Down Lighting,kitchen lighting,
Cross Reference Number G4R, G4R-50W-120-AT
For use with insulated ceilings: Yes only when insulation is 4" away from housing
Material Steel
Dimmable Yes
Approvals cETL, ETL
Bulbs (1) Up to a maximum 50W GU10 lamp
Bulb Included No
Features
  • Thermally Protected Non-IC remodel housing.
  • Can be installed from below the ceiling.
  • Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2" to 1-3/8".
  • Designed for accent and task lighting applications.
  • Dependable, favorable design and effortless installation.
  • 5-1/2" height allows use in 2"x 6" joist construction.
  • Unit clips through 4-1/4" ceiling opening
Housing Specs High temperature painted 22 gauge deep drawn single piece housing. Accommodates lamps up to 50W depending on trim used.
Thermal Protection Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
Socket GU10 floating socket allows for lamp to snap into trim and provide secure lamp retention.
Installation Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thickness from 1/2" to 1-3/8".
Junction Box ETL listed for through-branch circuit wiring and has eight 1/2" KOs and four Romex knockouts with strain relief.
Max Watts 50
Voltage Type Line Voltage (120V +)
Input Voltage 120VAC
Output Voltage 120VAC
Diameter (in) 4"
Height 5-1/2"
Width 4-3/8"
Length 11"
You may also be interested in the following product(s)
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Recessed lighting non-IC GU10 120volt air tight remodel housing

4" Recessed lighting air tight GU10 non-IC remodel housing for in 120volt application and works hundreds of our 4" low voltage GU10 compatible recessed lighting trims and halogen & LED GU10 light bulbs up to 50watt. NOTE: THIS HOUSING HAS A GU10 SOCKET AND MUST BE USED WITH GU10 LAMPS ONLY. ORDER CAREFULLY.


NOTE: The hole for this fixture is required to be 4-1/4" we send a template do not cut the hole until the fixture is on site.

$15.37