Product Videos

  • Recessed lighting Torsion Spring Retention system overview

4" Recessed lighting GU10 120volt non-IC air tight new construction housing

# TLSG4-50W-120-AT-GU10

Be the first to review this product

4" Recessed lighting non-IC air tight GU10 housing for use in new construction, 120volt application and works with hundreds of our 4" low voltage GU10 compatible recessed lighting trims and halogen & LED GU10 light bulbs up to 50watt. NOTE: THIS IS A GU10 HOUSING AND ONLY WORKS WITH GU10 LAMPS. ORDER CAREFULLY.

Availability: Typically ships same or next business day!

$16.14

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture line voltage, thermally protected IC rated, specification grade recessed housing. Designed for new construction. Accommodates up to 50W GU10 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
Additional Information
Application Recessed Lighting, Down Lighting,kitchen lighting,
Cross Reference Number G4, G4-50W-120-AT, G4AT
For use with insulated ceilings: Yes
Material Steel
Dimmable Yes
Approvals cETL, ETL
Bulbs (1) Up to a maximum 50W GU10 lamp
Bulb Included No
Features
  • Thermally Protected Non-IC housing.
  • Designed for accent and task lighting applications.
  • Wire through junction box.
  • Preinstalled adjustable bar hangers.
  • Dependable, favorable design and effortless installation.
  • 5-1/2" height allows use in 2"x 6" joist construction.
  • Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
  • Gasket to prevent air flow from heated or air conditioned spaces. Meets all national air flow requirements.
Housing Specs High temperature painted 22 gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8 ceiling. Accommodates lamps up to 50watt depending on trim used.
Thermal Protection Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
Socket GU10 floating socket allows for lamp to snap into trim and provide secure lamp retention.
Installation Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. They contain a doubleheaded real nail for secure attachment into the joist. Bar hanger nails are installed on a 20° downward angle for better contact, and the 90° pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
Junction Box ETL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps.
Max Watts 50
Voltage Type Line Voltage (120V +)
Input Voltage 120VAC
Output Voltage 120VAC
Diameter (in) 4"
Height 5-1/2"
Width 5-1/2"
Length 8" - 24"
You may also be interested in the following product(s)
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Recessed lighting GU10 120volt non-IC air tight new construction housing

4" Recessed lighting non-IC air tight GU10 housing for use in new construction, 120volt application and works with hundreds of our 4" low voltage GU10 compatible recessed lighting trims and halogen & LED GU10 light bulbs up to 50watt. NOTE: THIS IS A GU10 HOUSING AND ONLY WORKS WITH GU10 LAMPS. ORDER CAREFULLY.

$16.14