Product Videos

  • Buying cheap LED bulbs doesn't always pay off!

4" Recessed low voltage electronic remodel shallow housing non-IC air tight 120volts

# TLSL4RE-S-35-120-AT

Be the first to review this product

4" shallow recessed low voltage remodel housing with electronic transformer fits 2" x 4" joist construction. The one to use where space is limited. Works with any MR16 lamp up to 35watts, 20watt lamp is usually bright enough for most applications. Use this housing with any of our 4" designer quality trims.
Use with any LOW VOLTAGE trim and MR16 Lamp

Availability: Typically ships same or next business day!

$83.30

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture low voltage, thermally protected remodel housing. For fast and easy installation in existing plaster or mechanical ceilings from 1/2" to 1-3/8" thick. Four remodel clips are easily retractable for fixture removal if necessary. Accommodates up to 35W MR16 lamps. Junction box is provided with eight 1/2" KOs and four Romex knockouts with strain relief.
Additional Information
Warranty 90 Days
Important Note Use with any LOW VOLTAGE trim and MR16 Lamp
Application Recessed Lighting, Down Lighting,kitchen lighting
For use with insulated ceilings: NO
Material Aluminum
Dimmable Any low voltage dimmer
Approvals ETL
Bulbs (1) Up to Maximum 12V 35W MR16
Bulb Included No
Features Integral low voltage electronic transformer to eliminate noise and vibration, increasing lamp life and lighting quality. Thermally Protected Non-IC Remodel housing. Can be installed from below the ceiling Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from1/2" to 1-3/8". Designed for accent and task lighting applications. Dependable, favorable design and effortless installation. 3-5/8" height allows use in 2"x 4" joist construction. Unit clips through 41/4" ceiling opening.
Housing Specs High temperature painted 22 gauge deep drawn single piece housing. Accommodates lamps up to 35W depending on trim used.
Socket low voltage MR16 female 2 pin
Thermal Protection Thermally Protected Non-IC Remodel housing.
Installation Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thickness from 1/2" to 1-3/8".
Junction Box ETL listed for damp location through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain relief.
Max Watts 35
Voltage Type Low Voltage (12Volt)
Input Voltage 120VAC
Output Voltage 12VAC
Diameter (in) 4
Height 3-5/8"
You may also be interested in the following product(s)
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Recessed low voltage electronic remodel shallow housing non-IC air tight 120volts
4" shallow recessed low voltage remodel housing with electronic transformer fits 2" x 4" joist construction. The one to use where space is limited. Works with any MR16 lamp up to 35watts, 20watt lamp is usually bright enough for most applications. Use this housing with any of our 4" designer quality trims.
$83.30