Product Videos

  • Buying cheap LED bulbs doesn't always pay off!

4" Shallow recessed low voltage 35watt IC AT housing 120volt magnetic transformer

# TLSL4ICE-S-35-M-120-AT

Be the first to review this product

Shallow 4" recessed low voltage new construction IC and AT housing. Fits in tight spaces and 2" x 6" joist new construction at only 5-1/2" tall. Works with any MR16 lamp up to 35watts.
Use with any LOW VOLTAGE trim and MR16 Lamp

Availability: Typically ships same or next business day!

$99.99

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture low voltage, thermally protected IC rated, specification grade recessed housing. Designed for new construction. Accommodates up to 35W MR16 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
  • Integral low voltage magnetic transformer to prolong lamp life and increase lighting quality.
  • Thermally Protected IC housing.
  • Designed for accent and task lighting aplications.
  • Wire through junction box.
  • Preinstalled adjustable bar hangers.
  • Dependable, favorable design and effortless installation.
  • 5-1/2" height allows use in 2"x 6" joist construction.
  • Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
  • Gasket to prevent air flow from heated or air conditioned spaces.
  • Meets all national air flow requirements.
Additional Information
Warranty 90 Days
Important Note Use with any LOW VOLTAGE trim and MR16 Lamp
Application Recessed Lighting, Down Lighting,low voltage lighting,kitchens, office spaces
Cross Reference Number BLRICAT,SRL4ICN,CLV1499ICTA,RX-204ICAT
For use with insulated ceilings: Yes
Material Aluminum
Dimmable Any low voltage dimmer
Approvals ETL
Bulbs (1) Maximum 12V 35W MR16
Bulb Included No
Features
  • Integral low voltage magnetic transformer to prolong lamp life and increase lighting quality.
  • Thermally Protected IC housing.
  • Designed for accent and task lighting aplications.
  • Wire through junction box.
  • Preinstalled adjustable bar hangers.
  • Dependable, favorable design and effortless installation.
  • 5-1/2" height allows use in 2"x 6" joist construction.
  • Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
  • Gasket to prevent air flow from heated or air conditioned spaces.
  • Meets all national air flow requirements.
Housing Specs

OUTER HOUSING - Die-formed aluminum construction for maximum heat dissipating air chamber on top of the housing. Junction box could be accessed from inside and outside housing.
INNER HOUSING - Deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8" ceiling.

Socket MR-16 12volt Socket 20-35 Watt Only
Thermal Protection Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material.
Transformer Enhanced in heat dissipating cover, to provide noise free operation. Attached to junction box cover so it may be serviced from below the ceiling. Thermally protected. Class H dimming magnetic transformer.
Installation Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
Junction Box ETL and UL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps.
Max Watts 35
Voltage Type Low Voltage (12Volt)
Input Voltage 120VAC
Output Voltage 12VAC
Diameter (in) 4
Height 5-1/2"
Width 8"
Length 12-1/4"
You may also be interested in the following product(s)
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Shallow recessed low voltage 35watt IC AT housing 120volt magnetic transformer
Shallow 4" recessed low voltage new construction IC and AT housing. Fits in tight spaces and 2" x 6" joist new construction at only 5-1/2" tall. Works with any MR16 lamp up to 35watts.
$99.99