Product Videos

  • Buying cheap LED bulbs doesn't always pay off!

4" Shallow recessed low voltage electronic 35watt non-IC air tight housing 120volt

# TLSL4E-S-35-E-120-AT-W

Be the first to review this product

Shallow 4" recessed low voltage new construction non-IC air tight housing with electronic transformer fits 2" x 4" joist construction .3-5/8" Tall Works with any MR16 lamp up to 35watts. Our most popular low voltage housings as we offer almost 1000 different trims in an array of finishes and styles.
Use with any LOW VOLTAGE trim and MR16 Lamp

Availability: Typically ships same or next business day!

$75.16

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture low voltage, thermally protected non-IC rated, specification grade recessed housing, designed for new construction. Accommodates up to 35W MR16 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
Additional Information
Warranty 90 Days
Important Note Use with any LOW VOLTAGE trim and MR16 Lamp
Application Recessed Lighting, Down Lighting,low voltage lighting,kitchens, office spaces
Cross Reference Number BL4E-S-35-E-120-AT-W
For use with insulated ceilings: Yes
Dimmable Any low voltage dimmer
Approvals cETL, ETL
Bulbs (1) Maximum 12V 35W MR16
Bulb Included No
Features
  • Integral low voltage electronic transformer to eliminate noise and vibration, increasing lamp life and lighting quality.
  • Thermally Protected Non-IC housing.
  • Designed for accent and task lighting applications.
  • Wire through junction box.
  • Preinstalled adjustable bar hangers.
  • Dependable, favorable design and effortless installation.
  • 3-5/8" height allows use in 2" x 4" joist construction.
  • Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
Housing Specs High temperature painted 22 gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate 1⁄2" to 1-3/8" ceiling. Accommodates lamps up to 35W depending on trim used.
Socket MR-16 12volt Socket 20-35 Watt Only
Thermal Protection Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material.
Transformer Class II dimming electronic trans- former enhanced in heat dissipating cover attached to junction box cover.
Installation Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20° downward angle for better contact, and the 90° pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
Junction Box ETL and cETL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps.
Max Watts 35
Voltage Type Low Voltage (12Volt)
Input Voltage 120VAC
Output Voltage 12VAC
Diameter (in) 4
Height 3-5/8"
Width 5-1/2"
Length 8", Bar Hangers:12"-24"
You may also be interested in the following product(s)
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Shallow recessed low voltage electronic 35watt non-IC air tight housing 120volt
Shallow 4" recessed low voltage new construction non-IC air tight housing with electronic transformer fits 2" x 4" joist construction .3-5/8" Tall Works with any MR16 lamp up to 35watts. Our most popular low voltage housings as we offer almost 1000 different trims in an array of finishes and styles.
$75.16