Details
- Optics
- Anyone can mount a chip to a heat sink and make a down light. Gather the light scattered by the LED chip, shape it into a functional beam with a state of the art reflector, integrate the light through a smooth reflector to minimize brightness, then top it all off with a glare reducing cone that has a 55-degree cut-off. Now you have a professionally engineered, superior quality, LED Retrofit consuming less than 12 watts and producing over 500 lumens.
- Durability
- Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing the continued cool operation for years. Life tests have shown the LED Retrofit light output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires the Air-Shutâ„¢ system. Our LED driver is rated for 50 to 60 Htz at 120V input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermal protected for additional safety. In installations requiring 277V, we offer a step-down transformer option that is field installable.
- Repeatable
- Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the LED Retrofit is engineered for quality. All LED luminaries are rated at 85+ CRI and 27K, 30K, 35K, 40K and 51K, as rated and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications to accept only those chips that produce no ultra violet light and with very minimal infrared.
- Dimmable
- The LED is dimmable down to 15% of initial light output by using an electronic low voltage dimmer. The
following Lutron dimmers have been tested to be compatible with the LED retrofit system:
- MAELV-600
- DVELV-600
- RAELV-500L
- HOME WORKS OR GRAFIK-EYE
- VANTAGE LIGHTING SYSTEMS.
- Interchangeable
- The LED Retrofit system works in our dedicated (TLSLD5IC-AT, TLSLD5RIC-AT) housings and our existing 5" incandescent housings (or standard TLS5IC-AT and TLS5RIC-AT) but is also suitable for using in most 5-inch recessed downlight housing.
- Adaptable
- All LED Retrofit luminaries are shipped standard with our custom engineered Edison adapter. This adapter assembly allows the luminaries to install directly into existing 5" downlight housings and most other 5-inch downlight housings.
- Warranty
- The LED Retrofit is warranted for 3 years of flawless operation, as a system, from housing to bar hangers. When the LED Retrofit is installed in retrofit applications, only the LED Retrofit itself is warranted.
Additional Information
Warranty | 90 Days |
---|---|
Important Note | Special order item and can not be returned |
Bulb Wattage | 12 |
Voltage Type | Line Voltage (120Volt) |
ESR-4417 | No |
Cross Reference Number | US-LED 1497 |
Application | Recessed lighting retrofit, kitchen lighting,office lighting,retail store lighting |
Bulb Included | Yes |
Dimmable | Yes |
Material | Aluminum, Glass, Plastic |
Inside Color | Chrome |
Outside Color | Satin |
Lumens | over 500 usable |
Diameter (in) | 6.56 |
Inside Diameter (in.) | 4.75 |
Height | 6.375 |