Details
New construction, thermally protected, IC rated specification grade recessed housing. Designed for sloped ceiling applications where the ceiling pitch ranges from 2/12 to 6/12. Accommodates up to 75W PAR30, R30 lamps, 60W A19 lamps and 65W BR30 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4 KO and four Romex knockouts with strain relief.
Additional Information
| Warranty | 90 Days |
|---|---|
| Important Note | Do not use on slopes in excess of 27 degrees. Ask our design team for help with slope ceiling trims. |
| Application | Recessed Lighting, Down Lighting, Slope Ceiling New Construction IC and AT,kitchen lighting |
| Cross Reference Number | B36ICAT,SR8021CN,CHSCTRA,RX-306ICAT |
| For use with insulated ceilings: | Yes |
| Material | Aluminum |
| Dimmable | Yes |
| Approvals | ETL |
| Bulbs | (1) Up to a maximum 75W R/PAR30, 60W A19, 65W BR30 |
| Bulb Included | No |
| Features | Thermally Protected IC housing. The socket bracket is specially designed to swivel and rotate so the lamp could be aligned properly. The lamp will aim straight down regardless of the ceiling pitch. Adjustable socket bracket with a slope indicator provides consistent lamp alignment and setup. Wire through junction box. Preinstalled adjustable bar hanger. Dependable, favorable design and effortless installation. 7-1/2 height allows use in 2x 8 joist construction.Preinstalled socket cap provides electrical contact protection against dust, paint and over spray. |
| Thermal Protection | Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material. |
| Junction Box | ETL listed for through- branch circuit wiring and has four 1/2 KOs, one 3/4 KO and four Romex knockouts with true pry- out slots and strain clamps. |
| Installation | Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24 joist span and can be shortened for 12 joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary. |
| Socket | Medium base screw shell porcelain socket preinstalled on a mounting bracket is specially designed to swivel and rotate so the lamp could be aligned properly. The lamp will aim straight down regardless of the ceiling pitch. |
| Housing Specs | Die-formed all aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2 to 1-3/8 ceilings. |
| Max Watts | 75 |
| Voltage Type | Line Voltage (120V +) |
| Input Voltage | 120VAC |
| Diameter (in) | 6 |
You may also be interested in the following product(s)
-
Recessed lighting LED 12watt Par30 Long Neck 5000K 40° Flood light bulb cool white dimmable
# LED-PAR30D-5000K-FL$4.85 As low as: $3.85 -
Recessed lighting LED 11watt Par 30 Long Neck 2700K 40° Flood light bulb is dimmable
# LED-PAR30D-2700K-FL$6.50 -
Recessed lighting LED 11watt Par 30 Short Neck 2700K 40° flood light bulb dimmable
# LED-PAR30DSN-2700K-FL$5.75 -
Recessed lighting LED 11watt Par 30 Short Neck 2700K 30° narrow flood light bulb dimmable
# LED-PAR30DSN-2700K-NFL$4.00
