Details
Part of the Fire Shield family of fire rated housings. Use with our 4" LED trim modules. Will not work with halogen or incandescent bulbs.
Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings.
Provided with gasket to prevent airflow from heated or air conditioned spaces. Meets or exceeds all national air flow requirements.
FIRE SHIELD Housings are designed to meet today’s One-Hour (UL L500 & P500) or Two-Hour (UL L505) Fire-Rated IC & Non-IC Codes for high-rise Condominiums, Apartment Buildings, Multi-Family Residences, Hotels, Hospitalities, Assisted Living Homes, Hospitals, Health Care and many more applications.- FIRE PROTECTION PERFORMANCE
-
- The luminaire ships assembled with the fire protection material already attached in their working positions
- As the fire intensifies, a protection disk seals off the bottom opening of the housing and stops the fire from passing through the fixture
- The inner assembly reacts strongly to high temperatures (428°F/220°C and above) and swells to a solid dense mass filling the entire luminaire cavity
- Prevents flames and smoke from passing through the light fixture and spreading throughout floor above
- Fire Shield recessed lighting luminaire eliminates the use of subcontractors to build additional boxes around a luminaire to achieve a 1-hour or 2-hour fire rating
- The Fire Shield family of Lighting Luminaires protect the floors above by preventing heat and flames from passing into the ceiling void
- Easier and faster to install than custom-built fireboxes and housings that require hats or additional fire-rated materials
- Conforms to ASTM STD 119
- AIR-SHUT ASTM E283
-
- Gasket to prevent air flow from heated or air conditioned spaces.
- Meets all national air flow requirements.
- DIMMING INFORMATION
-
- DIMTR - Triac Dimming 120V
- EZ-CONNECT
- Housing is engineered with a unique 'EZ-connect' wiring system, that when used with Energy Star and California Title-24 (compliances pending) compliant LED trim modules is also compliant. The unique EZ-connect system also meets other state and national regulatory mandates. LED Module connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards.
Polarity-specific EZ-connect system engineered to match with Elite LED Module trims. Meets strict code requirements where Edison Base Sockets have been banned.
- c-UL-us listed for Damp location.
- c-UL-us listed for feed Through Wiring.
- c-UL-us listed for Direct Contact with Insulation
Additional Information
| Important Note | Use only with our LED Modules |
|---|---|
| Application | Fire rated kitchen lighting, shower lighting, bathroom lighting, general lighting |
| Cross Reference Number | LD4-IC-AT, LD4IC-AT, H995ICAT |
| Material | Steel |
| Approvals | Air Tight, Assembled in America, California Title 24, ETL |
| Bulb Included | No |
| Housing Specs | Powdered-coated steel and galvanized steel for maximum heat dissipation and rust protection. Factory assembled with 1 or 2 hour Fire-rated components. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction.
Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24” joist span. They can be positioned on either the long or short axis of the housing and can be shortened for 12” joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20° downward angle for better contact, and the 90° pivoting mounting plate makes installation fast and accurate. |
| Thermal Protection | Standard thermal protection device guards against improper installation and misuse of insulation material. |
| Socket | Polarity-specific EZ-connect system engineered to match with module retrofit LED trims. Unique 'EZ-connect' wiring system, that when used with Energy Star and California Title-24 (compliances pending) compliant LED trim modules is also compliant. The unique EZ-connect system also meets other state and national regulatory mandates. LED Module connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards. *Meets strict code requirements where Edison Base Sockets have been banned. |
| Installation |
|
| Junction Box | UL Listed for through-branch circuit wiring, provided with four 1/2" knockouts, one 3/4" knockout and four Romex knockouts with true pry-out slots and strain clamps. Designed for straight through conduit runs. |
| Max Watts | 11 |
| Voltage Type | Line Voltage (120V +) |
| Input Voltage | 120VAC |
| Diameter (in) | 4-3/8" |
| Height (in.) | 5-1/2" |
| Width (in.) | 5-1/2" |
| Length (in.) | Frame: 8", Bar Hangers: 12" - 24" |
Customers Who Bought This Item Also Bought
