3" GU10 Recessed lighting IC new construction housing

# TLSG3IC-50W-120-AT

Be the first to review this product

3" GU10 recessed IC housing is for new construction, fits in tight spaces and 2" x 8" joist new construction. Works with any MR16 GU10 light bulb up to 50watts including LED MR16 GU10 bulbs. Use this housing with any of our 3" designer quality MR16 GU10 trims.
Limited Stock

Availability: Typically ships same or next business day!

$45.20

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture, thermally protected, specification grade recessed housing. For new construction. Accommodates up to 75W MR16 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4"" KO and four Romex knockouts with strain relief.
Additional Information
Important Note Limited Stock
Application Designed for Accent and Task Lighting in Kitchens, Bathrooms, Homes and Office spaces.
Cross Reference Number G3IC, G3IC-50W-120-AT
For use with insulated ceilings: Yes
Adjustable Yes
Attachment Type Butterfly Compression Clips
Dimmable Yes
Approvals cETL, cULus
Bulbs MR-16 GU10 or LED MR16 GU10 up to 50watts
Bulb Included No
Features Small aperture line voltage, thermally protected, specification grade recessed housing. For new construction and iinsulated ceilings.
Thermal Protection Yes
Junction Box ETL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps.
Installation Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20° downward angle for better contact and the 90° pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
Socket GU10 floating socket allows for lamp to snap into trim and provide secure lamp retention.
Housing Specs OUTER HOUSING - Die-formed aluminum construction for maximum heat dissipating air chamber on top of the housing. Junction box could be accessed from inside and outside housing. INNER HOUSING - Deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8" ceiling.
Max Watts 50
Voltage Type Line Voltage (120Volt)
Input Voltage 120VAC
Output Voltage 120VAC
Diameter (in) 3-3/4"
Height 7-1/4"
Width 7-7/8"
Length 12-3/8", 12"-25" bar hanger
Customers Who Bought This Item Also Bought
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

3" GU10 Recessed lighting IC new construction housing
3" GU10 recessed IC housing is for new construction, fits in tight spaces and 2" x 8" joist new construction. Works with any MR16 GU10 light bulb up to 50watts including LED MR16 GU10 bulbs. Use this housing with any of our 3" designer quality MR16 GU10 trims.
$45.20