Product Videos

  • Buying cheap LED bulbs doesn't always pay off!

4" Recessed electronic low voltage housing non-IC air tight 277volts

# TLSL4-50-E-277-AT

Be the first to review this product

New Construction, T-Bar or Drop Ceilings 4" Air Tight 50watt 277volt Low Voltage New Construction Recessed Housing for ceilings without insulation. This is a NON-IC rated housing. Use with any of our large selection of 4" Low voltage recessed trims and MR16 halogen bulbs.
Use with any LOW VOLTAGE trim and MR16 Lamp

Availability: Typically ships same or next business day!

$97.42

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
Small aperture low voltage, thermally protected, specification grade recessed housing. For new construction Non-insulated ceilings or where insulation can be kept 3" away from the housing. Accommodates up to 50W MR16 lamps. Furnished with preinstalled adjustable bar hangers. Junction box is provided with four 1/2" KOs, one 3/4" KO and four Romex knockouts with strain relief.
Additional Information
Warranty 90 Days
Important Note Use with any LOW VOLTAGE trim and MR16 Lamp
Application Recessed Lighting, Down Lighting
Cross Reference Number BL4AT,SRL4N,CLV1499TA,RX-204AT
For use with insulated ceilings: NO
Material Aluminum
Dimmable Any low voltage dimmer
Approvals ETL
Bulbs (1) UP to a maximum 12V 50W MR16
Bulb Included No
Features Integral low voltage magnetic transformer to prolong lamp life and increase lighting quality. Thermally Protected Non-IC housing. Designed for accent and task lighting applications. Wire through junction box. Preinstalled adjustable bar hangers. Dependable, favorable design and effortless installation. 5-1/2" height allows use in 2"x6" joist construction. Special screw on the frame locks bar hangers in place which prevents the housing from any movement once installed.
Housing Specs High temperature painted 22 gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate 1/2" to 1-3/8" ceiling. Accommodates lamps up to 50W depending on trim used.
Socket MR-16 12volt Socket
Thermal Protection Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material.
Installation Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24" joist span and can be shortened for 12" joists. Integral bar hanger nailers are designed to be hammered directly into the joist without additional nails or screws and makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary.
Junction Box ETL and UL listed for through-branch circuit wiring and has four 1/2" KOs, one 3/4" KO and four Romex knockouts with true pry-out slots and strain clamps.
Max Watts 50
Voltage Type Low Voltage (12Volt)
Input Voltage 277VAC
Output Voltage 12VAC
Diameter (in) 4
Height 5-1/2"
You may also be interested in the following product(s)
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

4" Recessed electronic low voltage housing non-IC air tight 277volts
New Construction, T-Bar or Drop Ceilings 4" Air Tight 50watt 277volt Low Voltage New Construction Recessed Housing for ceilings without insulation. This is a NON-IC rated housing. Use with any of our large selection of 4" Low voltage recessed trims and MR16 halogen bulbs.
$97.42